Rear Fender Stone Guard Add-Ons

Rear Fender Stone Guard Add-Ons

Blog Article

The Ultimate Guide to Truck & Bus Body Parts
Commercial vehicles live tough lives. Understanding each exterior component helps fleet managers, drivers and DIY enthusiasts keep vehicles safe, efficient and looking sharp. Below you’ll find everything you need to know—organized for easy reading and optimized for search.

1. Access & Visibility Components
Boarding Step
A boarding step (sometimes called a running board) gives drivers and passengers secure footing when entering a high-clearance cab. Look for non-slip coatings and check mounting bolts for corrosion during routine inspections.

Door
The door does more than open and shut—it houses side-impact beams, locks and weather seals. Lubricate hinges every oil change and inspect seals to prevent wind noise and water ingress.

Mirror
Large side mirrors with wide-angle inserts reduce blind spots on trucks and buses. Keep glass clean and tighten brackets regularly; vibration can loosen fasteners over time.

Other Windows
Safety glass used for other windows (side and rear) must stay chip-free to pass inspections. Replace cracked panes immediately to maintain structural rigidity.

Windscreen
The windscreen (windshield) is laminated for strength. Even small chips may spread on rough routes—repair early to avoid costly full replacements.

2. Protection, Styling & Aerodynamics
Bumper
A bumper absorbs low-speed impacts and protects critical front or rear structure. Modern composite skins hide energy-absorbing foam or aluminum beams. After a collision, confirm internal reinforcements aren’t bent.

Cabin Corner
The cabin corner panel caps the rear edges of the cab. Because it sits low, it’s prone to rust; add stone-chip guard or mud flaps to prolong life.

Fender;front & Fender,Rear
Fender;front shields the engine bay and cabin from debris kicked up by steer-axle tires.

Fender,Rear (rear fender) keeps spray off following traffic and protects the load bed.
Use plastic liners or rubberized spray to fight corrosion behind both fenders.

Front Cowling
Above the windshield, the front cowling streamlines airflow and houses marker lights on coaches. Damaged cowlings create whistle noises and increase drag—repair cracks promptly.

Front Grill
Your front grill feeds cooling air to the radiator while defining brand identity. Broken slats restrict airflow, here risking overheating; replacement is usually inexpensive plastic clip-on work.

Front Panel
The front panel ties headlights, bumper and grill together. Because it’s a structural sheet-metal piece, professional alignment is vital after any accident.

Side Panel
The long side panel stretches from wheel arch to wheel arch, carrying paint and company graphics. Paint chips should be touched up fast—the flat surface rusts quickly once exposed.

3. Weather & Road-Spray Defence
Engine Hood
An engine hood (bonnet) protects the powertrain from moisture and theft website while providing quick service access. Check hood latch and safety catch every service interval.

Rear Flap
Mounted behind drive wheels, a rear flap (mudflap) minimizes spray and rock throw. Tattered flaps invite road-worthiness fines—replace when torn past 25 %.

Side Flap
A side flap functions like a small mudflap ahead of steps or doors, keeping road grime off entry points and side panels.

4. Safety Equipment
Underrun Guard
The underrun guard (rear impact guard) prevents smaller cars from submarining under the chassis. Bent bars lower crash protection and violate regulations—measure height and clearance after every rear-end impact.

5. Convenience & Storage
Storage Box
A frame-mounted storage box keeps tie-down straps, tools or wheel chocks safe and dry. Choose rust-proof aluminum or stainless steel and regularly oil the lock cylinder.

Sun Visor
An exterior sun visor above the windscreen blocks glare, reducing driver fatigue on dawn-to-dusk routes. Clear any accumulated ice or dirt to maintain visibility.

6. Vision in Any Weather
Wiper Linkage
The wiper linkage converts motor torque into sweeping blade motion. If your wipers judder or stop mid-stroke, check linkage bushings for play and ensure the motor shaft isn’t corroded.

Maintenance Checklist (At-a-Glance)
Part Weekly Check Service-Interval Task
Boarding Step Clean tread Tighten mounting bolts
Bumper Look for cracks Inspect energy absorber
Fender (front & rear) Remove mud buildup Touch-up paint chips
Windscreen Check for chips Replace wipers
Underrun Guard Verify no bends Torque sınav bolts

(Feel free to copy this table into your digital maintenance log.)

Conclusion: Small Parts, Big Impact
Each exterior component—from the humble boarding step to the critical underrun guard—contributes to the overall performance, safety and resale value of your commercial vehicle. By understanding their functions, following routine inspections and acting on early-warning signs, you’ll minimize downtime and extend fleet life.

Need replacement panels, mirrors or a fresh front grill? Contact our parts specialists today for OEM-grade components shipped worldwide.